 |
 |
|
 |
|
 หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Vibration Reduction in Slewing of a Very Flexible One-Link Manipulator Using Shaped Reference Inputs) ผู้เขียน: ดร.วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์ ,  กนกศักดิ์ เอี่ยมสมัย, Jitnapa Soontrajarn, Peter H. Meckl สื่อสิ่งพิมพ์:pdf AbstractFuture trends suggest that manipulators will be required to be light and to carry large payloads and this encourages the study of flexible-link robots. However, after more than three decades of investigation, vibration control of the flexible-link robot is still an unsolved problem. Researchers have made much progress using active and passive controls and with structural modification and new sensors and actuators, but a simple, effective and reliable vibration controller has yet to be found. To reduce vibration, shaping the reference input so that no energy is injected around the flexible modes can be performed in the time domain, by convolution of the input with a sequence of impulses or in the frequency domain, by optimally constructing a new input from suitable basis functions. While many researchers have applied the time-domain method to the flexible-link robot, the frequency-domain method is rarely seen with this type of robot. This paper investigated the results of applying the frequencydomain command shaping method to a flexible one-link robot. The closed-loop system consisted of a feed-forward, computed-torque loop and a feedback PID loop. As vital information for this method, the range of natural frequencies with respect to the robot’s parameters was obtained from an exact model, treating the flexible link as an Euler-Bernoulli’s beam. Using minimum a priori knowledge of the robot, the experimental results showed that the method is effective in reducing the vibration of a slewing flexible-link robot. |
 Researcherดร. ธีรพงษ์ ศรีเชียงสา, อาจารย์ที่ทำงาน:ภาควิชาวิศวกรรมไฟฟ้า คณะวิศวกรรมศาสตร์ ศรีราชา สาขาที่สนใจ:Advanced Bearingless Machine Drive, Active and Passive Magnetic Bearings, Electrical Machine Design, Advanced Electric Machine Control System, Permanent magnet machine Resume |
|
|
|
|
|
|
|
|
|
|
|
 ที่มา:การประชุมวิชาการ ครั้งที่ 47 มหาวิทยาลัยเกษตรศาสตร์หัวเรื่อง:การลดการสั่นสะเทือนของหัวอ่านฮาร์ดดิสก์ด้วยเทคนิคคอมมานด์เชปปิ้ง |
หัวเรื่อง:ไม่มีชื่อไทย (ชื่ออังกฤษ : Integrating an Input Shaper with a Quantitative-Feedback-Theory-Based Controller to Effectively Reduce Residual Vibration in Slewing of a Two-Staged Pendulum with Uncertain ผู้เขียน:ดร.วิทิต ฉัตรรัตนกุลชัย, รองศาสตราจารย์, ภูวดล โพธิ์แดง, Peter Heinrich Meckl สื่อสิ่งพิมพ์:pdf AbstractIn this study, a control system was proposed consisting of an outside-of-the-loop input shaper and a feedback controller based on quantitative feedback theory. The input shaper convolves the reference input with a properly designed impulse sequence to generate a shaped reference input that reduces the excitation in the system’s modal frequencies, resulting in less residual vibration. Recently, the input shaper has been placed inside-of-the-loop to attenuate noise-induced vibration under hard nonlinearity. However, this setting cannot reduce the vibrations induced from plant-input and plant-output disturbances as well as from plant model uncertainty. A controller was designed to meet various disturbance rejection specifications, when plant uncertainty is also taken into account. The input shaper was then designed using the closed-loop natural frequencies and damping. Together, the proposed control system could effectively reduce residual vibrations especially those induced from disturbances and uncertainty. The control system was applied to a two-staged pendulum where all masses were lumped together to create a simplified model used in controller design, and the inertia forces of both links and payload were treated as plant-input disturbance. Simulation and experimental results indicated that the control system was very effective in residual vibration reduction in the presence of uncertainty and disturbances. |